The Deck Part 2

Inside the baulk heads
after epoxy

After spending a lot of time fiddling and sanding to make sure everything was just right it was time to glue the deck in place. But before I could glue it down I had to seal everything with epoxy so that it will not be affected by any water that might get in. This was the first time that I had used the unthickened epoxy over such a large area. At least if it does not come out so well it will be hidden away. I coated the underside of the deck and the inside of the bulk heads with 2 coats of epoxy. It came out pretty well but part of me is glad that this section will be hidden away.

The inside of the Deck after a coat of epoxy